大白小白 發表于 2019-8-20 11:18
我也發過類似的帖子
http://www.whclglass.com.cn/thread-985793-1-1.html
鈴鈴鈴lj 發表于 2019-8-20 11:38
好的,謝謝!你是先把具體的形狀畫出來然后抽殼是嗎
jiuweixhao 發表于 2019-8-20 12:52
需要厚度均勻才能抽殼吧。
歡迎光臨 機械社區 (http://www.whclglass.com.cn/) | Powered by Discuz! X3.5 |